TOPICS LC EMI FILTER THERMISTOR CHIP FUSE
SURGE ABSORBERS VARISTOR ANTENNAS CHIP RESISTORS
For Power Lines For Communication Lines For ESD Litol - Power Strip
Applications Packaging Microgap Characteristics Handling Precautions
Testing Facilities


■ Features

  High DC spark-over voltage in spite of compact size (2types; 2700, 3000V) .
  DSS-272M and DSS-302M each correspond to 1200volts rms 3seconds or 1000volts rms 1minute and 1500volts rms 1minute AC withstanding voltage tests respectively.
  Quick response for surge voltage and low limiting voltage.
  Small capacitance and excellent insulation resistance (100M Ωmin)
  Stable for repeated discharge test conditions and environmental fluctuation.
  No polarity.
  No dark effect.
  This series is recognized under UL 1414, UL1449, CSA and T ÜV.

Typical applications

 AC Adaptor.
 Antenna-circuit of TV, VCR.
 Communication line. (If T, R~GND AC withstanding test is required.)

■ Part number system



■ Marking



■ Characteristics

Series
Part Number
DC spark-over
voltage Vs(V)
Insulation resistance
IR (Ω)
Electrostatic
capacitance
1kHz-6V max.
Surge current
capacity
DSS
DSS-272M
2,700V (2,160~3,240)
100MΩmin.
measured with
DC 500V
1pF max
8/20μsec-500A
DSS-302M
3,000V (2,400~3,600)

Series
Part Number
DC spark-over
voltage Vs
Surge life
test.
AC
Withstanding
voltage
UL aproved
CSA
approved
6)
EN approved
7)
4)
UL1414
5)
UL1449
DSS
DSS-272M
2,700V (2,160~3,240)
8/20μ50A
300 times
AC 1,200V-3sec.
AC 1,000V-1min.
O 1)
O 1)
O 2)
-
DSS-302M
3,000V (2,400~3,600)
AC 1,500V-1min.
O 1)
O 1)
O 2)
O 3)

1): Approved if used together with an UL approved varistor (V1mA≥270V), electrically connected in series by means such as twist and soldering, staking, welding etc.
2): Approved if used together with a varistor (AC125V : V1mA≥270V, D≥ø5mm, AC250V : V1mA≥470V, D≥ø5mm), electrically connected in series by means such as twist and soldering, staking, welding etc.
3): Approved if used together with a varistor (V1mA≥470V, D≥ø10mm), electrically connected in series by means such as twist and soldering, staking, welding etc.
4): UL Standard UL1414 File No.E89615 (N)
5): UL Standard UL1449 File No.E70785 (S)
6): CSA Standard C22.2 No1 File No. CA111411
7): DSS-302M has received recognition to EN132400 through TÜV. Report No J9750615.


■ V-l  Characteristics (Reference)




■ Surge Response characteristics (Reference)